Sockets Tutorial

This is a simple tutorial on using sockets for interprocess communication.
이 문서는 상호 커뮤니케이션을 위한 소켓 사용방법에 대한 간단한 튜토리얼이다.

The client server model

Most interprocess communication uses the client server model. These terms refer to the two processes which will be communicating with each other. One of the two processes, the client, connects to the other process, the server, typically to make a request for information. A good analogy is a person who makes a phone call to another person.
대부분의 IPC통신은 클라이언트-서버 모델을 사용한다. 이 말은 통신을 할 두 개의 프로세스들을 말한다. 두개의 프로세스중 하나는 클라이언트가 되고, 정보를 요청하기 위해 다른 하나의 프로세스에 접속한다. 좋은 예로는 다른 사람에게 전화를 거는 것이다.

Notice that the client needs to know of the existence of and the address of the server, but the server does not need to know the address of (or even the existence of) the client prior to the connection being established.
클라이언트는 서버가 있는지, 서버의 아이피 주소가 있는지 알 필요가 있지만, 서버는 클라이언트의 존재와, 클라이언트의 아이피 주소를 알 필요는 없다.

Notice also that once a connection is established, both sides can send and receive information.
연결이 이루어지면 양측은 정보를 보내고 받을 수 있다.

The system calls for establishing a connection are somewhat different for the client and the server, but both involve the basic construct of a socket. A socket is one end of an interprocess communication channel. The two processes each establish their own socket.
연결을 하기 위한 시스템콜은 클라이언트와 서버가 다르지만, 모두 소켓이라는 기본적인 구조를 가지고 있다.

The steps involved in establishing a socket on the client side are as follows:

이 단계에서 아래와 같이 클라이언트에 소켓을 만들어보자.

1. Create a socket with the socket() system call

socket() 시스템콜을 사용하여 소켓 만들기

2. Connect the socket to the address of the server using the connect() system call

connect() 시스템콜을 사용하여 서버의 주소를 소켓에 연결하기

3. Send and receive data.

데이터 보내기와 받기.

There are a number of ways to do this, but the simplest is to use the read() and write() system calls.
이 방법에는 여러가지가 있다. 하지만 간단히 read()와 write() 시스템콜을 사용한다.

The steps involved in establishing a socket on the server side are as follows:

이 단계에서 아래와 같이 서버에 소켓을 만들어보자.

1. Create a socket with the socket() system call

socket() 시스템콜을 사용하여 소켓 만들기

2. Bind the socket to an address using the bind() system call.

bind() 시스템콜을 사용하여 주소를 소켓에 연결하기

For a server socket on the Internet, an address consists of a port number on the host machine.
인터넷에서의 서버 소켓을 위해서 호스트 머신의 주소는 포트번호도 고려해야 한다.

3. Listen for connections with the listen() system call

listen() 시스템콜을 사용하여 접속요청에 귀를 귀울인다.

4. Accept a connection with the accept() system call. This call typically blocks until a client connects with the server.

accept() 시스템콜로 연결요청이 들어온것에 접속허가를 한다. 이 콜은 클라이언트가 서버와 연결이 되어 있는한 블록한다.

5. Send and receive data

데이터 보내기와 받기

Socket Types

When a socket is created, the program has to specify the address domain and the socket type. Two processes can communicate with each other only if their sockets are of the same type and in the same domain.
소켓이 생성될때 프로그램은 특별한 주소 도메인과 소켓 타입을 가져야 한다. 두 프로세스는 같은 타입과 같은 도메인의 소켓을 가지고 있어야 커뮤니케이션을 할 수 있다.

There are two widely used address domains, the unix domain, in which two processes which share a common file system communicate, and the Internet domain, in which two processes running on any two hosts on the Internet communicate. Each of these has its own address format.
주소 도메인 두 개가 사용된다. 파일시스템 통신과 공유하는 두 개의 프로세스에 유닉스 도메인과 인터넷 통신에서의 두 호스트에 돌아가는 두 개의 프로세스에 인터넷 도메인. 각각은 자신만의 주소 포멧을 가지고 있다.

The address of a socket in the Unix domain is a character string which is basically an entry in the file system.
유닉스 도메인에서의 주소는 파일스스템에 접근하기 위한 입구로써 문자열이다.

The address of a socket in the Internet domain consists of the Internet address of the host machine (every computer on the Internet has a unique 32 bit address, often referred to as its IP address). In addition, each socket needs a port number on that host. Port numbers are 16 bit unsigned integers. The lower numbers are reserved in Unix for standard services. For example, the port number for the FTP server is 21. It is important that standard services be at the same port on all computers so that clients will know their addresses. However, port numbers above 2000 are generally available.
인터넷 도메인에서의 소켓 주소는 호스트 머신의 인터넷 주소를 말한다. (인터넷의 모든 컴퓨터는 유일한 32비트 주소를 가지고 있으며, 이를 IP 주소라고 부른다.) 추가적으로 각 소켓은 호스트의 포트 번호가 필요하다. ftp를 위한 포트 번호는 21번이다. 모든 컴퓨터에게 같은 포트로 서비스되는 표준 포트는 매우 중요하다. 그래서 클라이언트들은 주소를 알아낸다. 그러나 2000번 이상의 포트 번호는 사용가능하다.(일반적으로 1024 이상의 포트번호를 사용해야함)

There are two widely used socket types, stream sockets, and datagram sockets. Stream sockets treat communications as a continuous stream of characters, while datagram sockets have to read entire messages at once. Each uses its own communciations protocol.
두 가지의 소켓 타입을 사용하는데, 스트림 소켓과 데이타그램 소켓이다. 스트림 소켓은 문자의 지속적인 스트림으로써 통신을 하고, 데이터그램 소켓은 한번에 모든 메시지를 읽어야만 한다. 각각은 자신만의 통신 프로토콜을 사용한다.

Stream sockets use TCP (Transmission Control Protocol), which is a reliable, stream oriented protocol, and datagram sockets use UDP (Unix Datagram Protocol), which is unreliable and message oriented.
스트림 소켓은 TCP에 사용하며, 신뢰성이 있고, 스트림 기반의 프로토콜이다. 그리고 데이터그램 소켓은 UDP를 사용하며, 신뢰성이 없고 메시지 기반의 프로토콜이다.

The examples in this tutorial will use sockets in the Internet domain using the TCP protocol.
이 튜토리얼에서의 예제로 TCP 프로토콜을 사용하는 인터넷 도메인에서의 소켓을 사용할 것이다.

Sample code

C code for a very simple client and server are provided for you. These communicate using stream sockets in the Internet domain. The code is described in detail below. However, before you read the descriptions and look at the code, you should compile and run the two programs to see what they do.
C언어 코드 매우 간단한 클라이언트와 서버를 제공한다. 인터넷 도메인에서의 스트림 소켓을 사용하는 통신이다. 이 코드는 아래에 설명되어 있다. 하지만 코드를 보기전에 두 프로그램이 어떻게 작동하는지 컴파일해보고 실행해 봐라.

server.c

client.c

Download these into files called server.c and client.c and compile them separately into two executables called server and client.
두 파일을 다운로드하고 컴파일하면 server와 client 실행파일이 생긴다.

They probably won't require any special compiling flags, but on some solaris systems you may need to link to the socket library by appending -lsocket to your compile command.
어떤 컴파일 플래그도 필요하지 않다. 그러나 솔라리스 시스템에서는 소켓 라이브러리를 링크할 필요가 있을지도 모르겠다. (-lsocket)

Ideally, you should run the client and the server on separate hosts on the Internet. Start the server first. Suppose the server is running on a machine called cheerios. When you run the server, you need to pass the port number in as an argument. You can choose any number between 2000 and 65535. If this port is already in use on that machine, the server will tell you this and exit. If this happens, just choose another port and try again. If the port is available, the server will block until it receives a connection from the client. Don't be alarmed if the server doesn't do anything;
이론적으로 클라이언트와 서버를 다른 인터넷 호스트에서 실행해야 한다. 서버를 먼저 시작한다. 서버가 실행되면 인삿말을 호출한다. 서버를 실행할 때 아규먼트로 포트 번호를 지정해야만 한다. 2000부터 65535 사이의 번호를 선택할 수 있다. 만약 머신에 이미 사용중인 포트라면 서버는 사용중이라고 알려주고 종료할 것이다. 이런 상황에서는 다른 포트번호를 입력하여 다시 실행한다. 만약 포트 번호가 사용가능하다면 서버는 클라이언트로부터 접속을 받을 때까지 블록될 것이다. 서버가 아무것도 하지 않는다고 놀라지마라.

It's not supposed to do anything until a connection is made.

Here is a typical command line:

server 51717 To run the client you need to pass in two arguments, the name of the host on which the server is running and the port number on which the server is listening for connections.

Here is the command line to connect to the server described above:

client cheerios 51717 The client will prompt you to enter a message. If everything works correctly, the server will display your message on stdout, send an acknowledgement message to the client and terminate. The client will print the acknowledgement message from the server and then terminate. You can simulate this on a single machine by running the server in one window and the client in another. In this case, you can use the keyword localhost as the first argument to the client.

The server code uses a number of ugly programming constructs, and so we will go through it line by line.

#include <stdio.h>

This header file contains declarations used in most input and output and is typically included in all C programs.

#include <sys/types.h>

This header file contains definitions of a number of data types used in system calls. These types are used in the next two include files.

#include <sys/socket.h>

The header file socket.h includes a number of definitions of structures needed for sockets.

#include <netinet/in.h>

The header file in.h contains constants and structures needed for internet domain addresses.

void error(char *msg)
 
{
  perror(msg);
  exit(1);
}

This function is called when a system call fails. It displays a message about the error on stderr and then aborts the program. The perror man page gives more information.

int main(int argc, char *argv[])
{
  int sockfd, newsockfd, portno, clilen, n;

sockfd and newsockfd are file descriptors, i.e. array subscripts into the file descriptor table . These two variables store the values returned by the socket system call and the accept system call. portno stores the port number on which the server accepts connections.

clilen stores the size of the address of the client. This is needed for the accept system call.

n is the return value for the read() and write() calls; i.e. it contains the number of characters read or written.

char buffer[256];

The server reads characters from the socket connection into this buffer.

struct sockaddr_in serv_addr, cli_addr; A sockaddr_in is a structure containing an internet address. This structure is defined in netinet/in.h.

Here is the definition:

struct sockaddr_in
{
  short   sin_family; /* must be AF_INET */
  u_short sin_port;
  struct  in_addr sin_addr;
  char    sin_zero[8]; /* Not used, must be zero */
};

An in_addr structure, defined in the same header file, contains only one field, a unsigned long called s_addr. The variable serv_addr will contain the address of the server, and cli_addr will contain the address of the client which connects to the server.

 if (argc < 2)
 {
   fprintf(stderr,"ERROR, no port provided");
   exit(1);
 }

The user needs to pass in the port number on which the server will accept connections as an argument. This code displays an error message if the user fails to do this.

sockfd = socket(AF_INET, SOCK_STREAM, 0);
if (sockfd < 0)
  error("ERROR opening socket");

The socket() system call creates a new socket. It takes three arguments. The first is the address domain of the socket. Recall that there are two possible address domains, the unix domain for two processes which share a common file system, and the Internet domain for any two hosts on the Internet. The symbol constant AF_UNIX is used for the former, and AF_INET for the latter (there are actually many other options which can be used here for specialized purposes).

The second argument is the type of socket. Recall that there are two choices here, a stream socket in which characters are read in a continuous stream as if from a file or pipe, and a datagram socket, in which messages are read in chunks. The two symbolic constants are SOCK_STREAM and SOCK_DGRAM.

The third argument is the protocol. If this argument is zero (and it always should be except for unusual circumstances), the operating system will choose the most appropriate protocol. It will choose TCP for stream sockets and UDP for datagram sockets.

The socket system call returns an entry into the file descriptor table (i.e. a small integer). This value is used for all subsequent references to this socket. If the socket call fails, it returns -1.

In this case the program displays and error message and exits. However, this system call is unlikely to fail.

This is a simplified description of the socket call; there are numerous other choices for domains and types, but these are the most common. The socket() man page has more information.

bzero((char *) &serv_addr, sizeof(serv_addr));

The function bzero() sets all values in a buffer to zero. It takes two arguments, the first is a pointer to the buffer and the second is the size of the buffer. Thus, this line initializes serv_addr to zeros. —-

portno = atoi(argv[1]);

The port number on which the server will listen for connections is passed in as an argument, and this statement uses the atoi() function to convert this from a string of digits to an integer.

serv_addr.sin_family = AF_INET;

The variable serv_addr is a structure of type struct sockaddr_in. This structure has four fields. The first field is short sin_family, which contains a code for the address family. It should always be set to the symbolic constant AF_INET.

serv_addr.sin_port = htons(portno);

The second field of serv_addr is unsigned short sin_port, which contain the port number. However, instead of simply copying the port number to this field, it is necessary to convert this to network byte order using the function htons() which converts a port number in host byte order to a port number in network byte order.

serv_addr.sin_addr.s_addr = INADDR_ANY;

The third field of sockaddr_in is a structure of type struct in_addr which contains only a single field unsigned long s_addr. This field contains the IP address of the host. For server code, this will always be the IP address of the machine on which the server is running, and there is a symbolic constant INADDR_ANY which gets this address.

if (bind(sockfd, (struct sockaddr *) &serv_addr, sizeof(serv_addr)) < 0)
   error("ERROR on binding");

The bind() system call binds a socket to an address, in this case the address of the current host and port number on which the server will run. It takes three arguments, the socket file descriptor, the address to which is bound, and the size of the address to which it is bound. The second argument is a pointer to a structure of type sockaddr, but what is passed in is a structure of type sockaddr_in, and so this must be cast to the correct type. This can fail for a number of reasons, the most obvious being that this socket is already in use on this machine. The bind() manual has more information.

listen(sockfd,5);

The listen system call allows the process to listen on the socket for connections. The first argument is the socket file descriptor, and the second is the size of the backlog queue, i.e., the number of connections that can be waiting while the process is handling a particular connection. This should be set to 5, the maximum size permitted by most systems. If the first argument is a valid socket, this call cannot fail, and so the code doesn't check for errors. The listen() man page has more information.

clilen = sizeof(cli_addr);
newsockfd = accept(sockfd, (struct sockaddr *) &cli_addr, &clilen);
if (newsockfd < 0)
  error("ERROR on accept");

The accept() system call causes the process to block until a client connects to the server. Thus, it wakes up the process when a connection from a client has been successfully established. It returns a new file descriptor, and all communication on this connection should be done using the new file descriptor. The second argument is a reference pointer to the address of the client on the other end of the connection, and the third argument is the size of this structure. The accept() man page has more information.

bzero(buffer,256);
n = read(newsockfd,buffer,255);
if (n < 0) error("ERROR reading from socket");
printf("Here is the message: %s
",buffer);

Note that we would only get to this point after a client has successfully connected to our server. This code initializes the buffer using the bzero() function, and then reads from the socket. Note that the read call uses the new file descriptor, the one returned by accept(), not the original file descriptor returned by socket(). Note also that the read() will block until there is something for it to read in the socket, i.e. after the client has executed a write(). It will read either the total number of characters in the socket or 255, whichever is less, and return the number of characters read. The read() man page has more information.

n = write(newsockfd,"I got your message",18);
if (n < 0) error("ERROR writing to socket");

Once a connection has been established, both ends can both read and write to the connection. Naturally, everything written by the client will be read by the server, and everything written by the server will be read by the client. This code simply writes a short message to the client. The last argument of write is the size of the message. The write() man page has more information.

  return 0;
}

This terminates main and thus the program. Since main was declared to be of type int as specified by the ascii standard, some compilers complain if it does not return anything.

Client code As before, we will go through the program client.c line by line.

#include <stdio.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <netinet/in.h>
#include <netdb.h>

The header files are the same as for the server with one addition. The file netdb.h defines the structure hostent, which will be used below.

void error(char *msg)
{
  perror(msg);
  exit(0);
}
int main(int argc, char *argv[])
{
  int sockfd, portno, n;
  struct sockaddr_in serv_addr;
  struct hostent *server;

The error() function is identical to that in the server, as are the variables sockfd, portno, and n. The variable serv_addr will contain the address of the server to which we want to connect. It is of type struct sockaddr_in. The variable server is a pointer to a structure of type hostent. This structure is defined in the header file netdb.h as follows:

struct  hostent
{
  char    *h_name;        /* official name of host */
  char    **h_aliases;    /* alias list */
  int     h_addrtype;     /* host address type */
  int     h_length;       /* length of address */
  char    **h_addr_list;  /* list of addresses from name server */
  #define h_addr  h_addr_list[0]  /* address, for backward compatiblity */
};

It defines a host computer on the Internet. The members of this structure are: h_name Official name of the host. h_aliases A zero terminated array of alternate

           names for the host.

h_addrtype The type of address being returned;

           currently always AF_INET.

h_length The length, in bytes, of the address. h_addr_list A pointer to a list of network addresses

           for the named host.  Host addresses are
           returned in network byte order.

Note that h_addr is an alias for the first address in the array of network addresses.

char buffer[256];
if (argc < 3)
{
  fprintf(stderr,"usage %s hostname port
", argv[0]);
  exit(0);
}
portno = atoi(argv[2]);
sockfd = socket(AF_INET, SOCK_STREAM, 0);
if (sockfd < 0)
  error("ERROR opening socket");

All of this code is the same as that in the server.

server = gethostbyname(argv[1]);
if (server == NULL)
{
  fprintf(stderr,"ERROR, no such host
");
  exit(0);
}

The variable argv[1] contains the name of a host on the Internet, e.g. cs.rpi.edu. The function: struct hostent *gethostbyname(char *name) Takes such a name as an argument and returns a pointer to a hostent containing information about that host. The field char *h_addr contains the IP address.

If this structure is NULL, the system could not locate a host with this name.

In the old days, this function worked by searching a system file called /etc/hosts but with the explosive growth of the Internet, it became impossible for system administrators to keep this file current. Thus, the mechanism by which this function works is complex, often involves querying large databases all around the country. The gethostbyname() man page has more information.

bzero((char *) &serv_addr, sizeof(serv_addr));
serv_addr.sin_family = AF_INET;
bcopy((char *)server->h_addr,
      (char *)&serv_addr.sin_addr.s_addr,
      server->h_length);
serv_addr.sin_port = htons(portno);

This code sets the fields in serv_addr. Much of it is the same as in the server. However, because the field server→h_addr is a character string, we use the function:

void bcopy(char *s1, char *s2, int length)

which copies length bytes from s1 to s2. —-

if (connect(sockfd,&serv_addr,sizeof(serv_addr)) < 0)
  error("ERROR connecting");

The connect function is called by the client to establish a connection to the server. It takes three arguments, the socket file descriptor, the address of the host to which it wants to connect (including the port number), and the size of this address. This function returns 0 on success and -1 if it fails. The connect() man page has more information. Notice that the client needs to know the port number of the server, but it does not need to know its own port number. This is typically assigned by the system when connect is called.

  printf("Please enter the message: ");
  bzero(buffer,256);
  fgets(buffer,255,stdin);
  n = write(sockfd,buffer,strlen(buffer));
  if (n < 0)
    error("ERROR writing to socket");
  bzero(buffer,256);
  n = read(sockfd,buffer,255);
  if (n < 0)
    error("ERROR reading from socket");
  printf("%s
",buffer);
  return 0;
}

The remaining code should be fairly clear. It prompts the user to enter a message, uses fgets to read the message from stdin, writes the message to the socket, reads the reply from the socket, and displays this reply on the screen.

Enhancements to the server code The sample server code above has the limitation that it only handles one connection, and then dies. A “real world” server should run indefinitely and should have the capability of handling a number of simultaneous connections, each in its own process. This is typically done by forking off a new process to handle each new connection.

The following code has a dummy function called dostuff(int sockfd).

This function will handle the connection after it has been established and provide whatever services the client requests. As we saw above, once a connection is established, both ends can use read and write to send information to the other end, and the details of the information passed back and forth do not concern us here.

To write a “real world” server, you would make essentially no changes to the main() function, and all of the code which provided the service would be in dostuff().

To allow the server to handle multiple simultaneous connections, we make the following changes to the code:

Put the accept statement and the following code in an infinite loop. After a connection is established, call fork()#### to create a new process. The child process will close sockfd#### and call #dostuff#####, passing the new socket file descriptor as an argument. When the two processes have completed their conversation, as indicated by dostuff()#### returning, this process simply exits. The parent process closes newsockfd####. Because all of this code is in an infinite loop, it will return to the accept statement to wait for the next connection.

Here is the code.

 while (1)
 {
   newsockfd = accept(sockfd,
               (struct sockaddr *) &cli_addr, &clilen);
   if (newsockfd < 0)
     error("ERROR on accept");
   pid = fork();
   if (pid < 0)
     error("ERROR on fork");
   if (pid == 0)
   {
     close(sockfd);
     dostuff(newsockfd);
     exit(0);
   }
   else
     close(newsockfd);
 } /* end of while */

Click here for a complete server program which includes this change. This will run with the program client.c.

The zombie problem The above code has a problem; if the parent runs for a long time and accepts many connections, each of these connections will create a zombie when the connection is terminated. A zombie is a process which has terminated but but cannot be permitted to fully die because at some point in the future, the parent of the process might execute a wait and would want information about the death of the child. Zombies clog up the process table in the kernel, and so they should be prevented. Unfortunately, the code which prevents zombies is not consistent across different architectures. When a child dies, it sends a SIGCHLD signal to its parent. On systems such as AIX, the following code in main() is all that is needed.

signal(SIGCHLD,SIG_IGN);

This says to ignore the SIGCHLD signal. However, on systems running SunOS, you have to use the following code:

void *SigCatcher(int n)
{
  wait3(NULL,WNOHANG,NULL);
}
...
int main()
{
  ...
  signal(SIGCHLD,SigCatcher);
  ...

The function SigCatcher() will be called whenever the parent receives a SIGCHLD signal (i.e. whenever a child dies). This will in turn call wait3 which will receive the signal. The WNOHANG flag is set, which causes this to be a non-blocking wait (one of my favorite oxymorons).

Alternative types of sockets This example showed a stream socket in the Internet domain. This is the most common type of connection. A second type of connection is a datagram socket. You might want to use a datagram socket in cases where there is only one message being sent from the client to the server, and only one message being sent back. There are several differences between a datagram socket and a stream socket.

Datagrams are unreliable, which means that if a packet of information gets lost somewhere in the Internet, the sender is not told (and of course the receiver does not know about the existence of the message). In contrast, with a stream socket, the underlying TCP protocol will detect that a message was lost because it was not acknowledged, and it will be retransmitted without the process at either end knowing about this. Message boundaries are preserved in datagram sockets. If the sender sends a datagram of 100 bytes, the receiver must read all 100 bytes at once. This can be contrasted with a stream socket, where if the sender wrote a 100 byte message, the receiver could read it in two chunks of 50 bytes or 100 chunks of one byte. The communication is done using special system calls sendto()#### and receivefrom()#### rather than the more generic read()#### and write()####. There is a lot less overhead associated with a datagram socket because connections do not need to be established and broken down, and packets do not need to be acknowledged. This is why datagram sockets are often used when the service to be provided is short, such as a time-of-day service.

server_udp.c

client_udp.c

These two programs can be compiled and run in exactly the same way as the server and client using a stream socket.

Most of the server code is similar to the stream socket code. Here are the differences.

sock=socket(AF_INET, SOCK_DGRAM, 0);

Note that when the socket is created, the second argument is the symbolic constant SOCK_DGRAM instead of SOCK_STREAM. The protocol will be UDP, not TCP. —-

fromlen = sizeof(struct sockaddr_in);
while (1)
{
  n = recvfrom(sock,buf,1024,0,(struct sockaddr *)&from,&fromlen);
  if (n < 0) error("recvfrom");

Servers using datagram sockets do not use the listen() or the accept() system calls. After a socket has been bound to an address, the program calls recvfrom() to read a message. This call will block until a message is received. The recvfrom() system call takes six arguments. The first three are the same as those for the read() call, the socket file descriptor, the buffer into which the message will be read, and the maximum number of bytes. The fourth argument is an integer argument for flags. This is ordinarily set to zero. The fifth argument is a pointer to a sockaddr_in structure. When the call returns, the values of this structure will have been filled in for the other end of the connection (the client). The size of this structure will be in the last argument, a pointer to an integer. This call returns the number of bytes in the message. (or -1 on an error condition). The recfrom() man page has more information.

  n = sendto(sock,"Got your message",17,0,(struct sockaddr *) &from,fromlen);
  if (n  < 0)
    error("sendto");
  }
}

To send a datagram, the function sendto() is used. This also takes six arguments. The first three are the same as for a write() call, the socket file descriptor, the buffer from which the message will be written, and the number of bytes to write. The fourth argument is an int argument called flags, which is normally zero. The fifth argument is a pointer to a sockadd_in structure. This will contain the address to which the message will be sent. Notice that in this case, since the server is replying to a message, the values of this structure were provided by the recvfrom call. The last argument is the size of this structure. Note that this is not a pointer to an int, but an int value itself. The sendto() man page has more information. The client code for a datagram socket client is the same as that for a stream socket with the following differences.

the socket system call has SOCK_DGRAM instead of SOCK_STREAM as its second argument. there is no connect() system call instead of read and write, the client uses recvfrom and sendto which are described in detail above.

Sockets in the Unix Domain Here is the code for a client and server which communicate using a stream socket in the Unix domain.

U_server.c

U_client.c

The only difference between a socket in the Unix domain and a socket in the Internet domain is the form of the address. Here is the address structure for a Unix Domain address, defined in the header file.

struct    sockaddr_un
{
 short    sun_family;    /* AF_UNIX */
 char    sun_path[108];    /* path name (gag) */
};

The field sun_path has the form of a path name in the Unix file system. This means that both client and server have to be running the same file system. Once a socket has been created, it remain until it is explicitly deleted, and its name will appear with the ls command, always with a size of zero. Sockets in the Unix domain are virtually identical to named pipes (FIFOs).

Designing servers There are a number of different ways to design servers. These models are discussed in detail in a book by Douglas E. Comer and David L. Stevens entiteld Internetworking with TCP/IP Volume III:Client Server Programming and Applications published by Prentice Hall in 1996. These are summarized here.

Concurrent, connection oriented servers

The typical server in the Internet domain creates a stream socket and forks off a process to handle each new connection that it receives. This model is appropriate for services which will do a good deal of reading and writing over an extended period of time, such as a telnet server or an ftp server. This model has relatively high overhead, because forking off a new process is a time consuming operation, and because a stream socket which uses the TCP protocol has high kernel overhead, not only in establishing the connection but also in transmitting information. However, once the connection has been established, data transmission is reliable in both directions.

Iterative, connectionless servers

Servers which provide only a single message to the client often do not involve forking, and often use a datagram socket rather than a stream socket. Examples include a finger daemon or a timeofday server or an echo server (a server which merely echoes a message sent by the client). These servers handle each message as it receives them in the same process. There is much less overhead with this type of server, but the communication is unreliable. A request or a reply may get lost in the Internet, and there is no built-in mechanism to detect and handle this.

Single Process concurrent servers

A server which needs the capability of handling several clients simultaneous, but where each connection is I/O dominated (i.e. the server spends most of its time blocked waiting for a message from the client) is a candidate for a single process, concurrent server. In this model, one process maintains a number of open connections, and listens at each for a message. Whenever it gets a message from a client, it replies quickly and then listens for the next one. This type of service can be done

with the select system call.

예제 소스코드